|
Post by Admin on Jan 22, 2020 12:05:38 GMT
Blizzard Nut ...save yourself the aggravation of putting a fan cooled motor in an enclosed hull; look for the "69 twin liquid 372 Rotax. If it needs rebuilding, have it bored to 399 dimensions since the pistons are a lot easier to find.
|
|
|
Post by medicare2021 on Dec 13, 2021 20:10:24 GMT
Hello, just got signed up to access this site, see your info, i have the 69 sea doo rotax water cooled engine 368cc, and have since learned upon dissassembly that the pistons are left and right, and do not interchange. Would you know who has the pistons to use for reboring .
thank you medicare
|
|
|
Post by olyman on Dec 19, 2021 15:11:01 GMT
Welcome to the site medicare. Pretty much every vintage (non-free air) rotax engine has a left and right piston until you start getting into the next generation of liquid cooled's. The 368 pistons are hard to find now b/c they were used much less than the 399s were. Boring to 399 might provide more options, but don't bother until you can find a set of pistons and rings. Few people you could check with Dale Jones skido399odr@ho993tmail.com (remove the numbers) Dave Barnhill da371ve.barnhill@ns.sy173mpatico.ca (remove the numbers) Goose www.reproductionvintageparts.com/
|
|