Post by dando127 on Jan 22, 2020 2:14:16 GMT
Green and Gold
Finally took a pic. Great for pulling two pieces together before riveting /welding/gluing. Wonderful for blind holes; quicker than using machine screws if you so have access to the back. The wind nut style does not require a special plier’s tool to use.
oly_man
Thats pretty cool. Never seen those before. So when you crank it down do the two arms split apart to make it bind in the hole?
Green and Gold
Operates as you describe. Center part wedges open the two outer arms. Like a blind bearing puller, except the clecos self adjusts for different thicknesses. Think the ones in the pic are good for up to an inch.
Finally took a pic. Great for pulling two pieces together before riveting /welding/gluing. Wonderful for blind holes; quicker than using machine screws if you so have access to the back. The wind nut style does not require a special plier’s tool to use.
oly_man
Thats pretty cool. Never seen those before. So when you crank it down do the two arms split apart to make it bind in the hole?
Green and Gold
Operates as you describe. Center part wedges open the two outer arms. Like a blind bearing puller, except the clecos self adjusts for different thicknesses. Think the ones in the pic are good for up to an inch.
